The cable pull that doesn't need a weight stack
Electronic resistance, flexible mounting
and versatile training modes.
- Founded
- 2021
- VOLTRA Weight
- 5.8 kg
- Resistance
- 2–90 kg
- Cable length
- 2.6 m
Training with Beyond Power
Device, mount and accessories interfere with each other
With the VOLTRA I, Beyond Power generates up to 90 kg of resistance electronically in a device that weighs only 5.8 kg and can be adapted to different environments. Allows fixing to training points.
The Beyond Power range
Find the appropriate equipment for your training area.
More about Beyond Power
01The VOLTRA systemMake a sensible combination of resistance, fastening and accessories.
1. VOLTRA I generates the resistance
The VOLTRA I replaces the weight stack with an electronically controlled motor: 2–90 kg resistance in 0.5 kg increments, variable depending on the training mode during movement. Control via 4-inch touchscreen.
2. The Mount determines the Zug position
The VOLTRA can be mounted deep into the ground, overhead, or anywhere in between – on racks, walls, poles and columns, or mobilely on the ground. A stable mounting point is required.
3. Grips and accessories define the exercise
One-handed grips, ropes, carbon bars, foot cuffs and more Attachments allow for a wide variety of exercises that can be performed in a variety of training modes.
02What makes Beyond Power technically outstandingElectronic resistance, compact design and software.
Electronic resistance
The resistance arises in the motor
In the VOLTRA, an electronically controlled motor generates the traction directly. This allows the load and the resistance profile to be modified during a single repetition.
Resistance curves
An exercise can behave differently
Resistance remains constant or varies with movement speed and distance. Various training modes make the training exciting and efficient.
Form factor
90 kg resistance in a 5.8 kg device
The VOLTRA I measures approximately 32 × 14 × 10 cm and does not require additional weight. Compared to a traditional cable pull, the required area is reduced by a factor of several.
Software
Display, app and updates are part of the system
The VOLTRA is operated via a 4-inch touchscreen and can be connected to the Beyond+ app for iOS and Android. Wi-Fi enables firmware updates, and training data supports analysis.
03Training modes and resistance functionsEight training modes and four additional functions.
The essential difference from a conventional cable pull is not only in the size of the VOLTRA, but in the electronic components. Control of the resistance.
Weight Training
Constant resistance to classic power and Hypertrophy training. The load can be adjusted in 0.5 kg increments.
Resistance Band
The resistance increases with increasing movement distance and thus forms the behavior of an elastic resistance.
Damper
The faster the movement is executed, the stronger the resistance becomes.
Isokinetic
The movement speed is specified. The resistance adapts dynamically during the movement.
Isometric Test
For static force tests, work is done against a fixed position and the generated force is measured.
Custom Curve
A custom resistance curve defines how strong the resistance should be in different sections of the movement.
Rowing
A dedicated resistance profile for rowing movements and repeated pulling movements.
Skiing
A specially tuned resistance behavior for Ski-like traction movements.
Four additional resistance functions
Additional function
Eccentric overload
The load in the eccentric phase can be set higher than in the concentric phase.
Additional function
Chains
The resistance changes over the movement path in a similar way as in training with additional chains on a barbell.
Additional function
Inverse Chains
The resistance curve runs in the opposite direction to the normal one. Has a chain function and can therefore place other stress points.
Additional function
Assist
The system can electronically support movement and thereby generate a specifically reduced effective load.
04The appropriate mountingMounts for rack, wall, bars and mobile training.
The Mount is not an optional accessory at Beyond Power. He determines the position and direction of movement of the VOLTRA and therefore which exercises can be performed in a meaningful way.
Power Rack
- Solution
- Sliding Rack Mount
- Suitable for
- If you want to change the train position regularly between low, medium and high.
Power Rack
- Solution
- Adaptive Rack Mount
- Suitable for
- When the VOLTRA must be attached flexibly to different positions on a compatible rack.
Power Rack
- Solution
- Fixed Rack Mount
- Suitable for
- For permanently defined exercise positions at a fixed training station.
Wall
- Solution
- DIY Dock
- Suitable for
- For a fixed installation on a suitable wall or a specially prepared structure.
Bar or cross beam
- Solution
- Fixed bar mount
- Suitable for
- For stable horizontal or vertical rods where a fixed fulcrum is desired.
Post, pillar or stable structure
- Solution
- Straps Mount
- Suitable for
- For mobile training situations or places where a classic rack is not available.
Ground
- Solution
- Travel Platform
- Suitable for
- For travel, hotel rooms, and mobile training situations without a fixed training infrastructure.
Variable direction of travel
- Solution
- Rotator Add-on
- Suitable for
- When the VOLTRA is to be oriented more freely towards the direction of travel relative to the attachment point.
05Who is Beyond Power suitable for?Homegym, performance, physiotherapy and mobile coaching.
Homegym
You want a cable pull, but not a big cable pull tower
If a suitable rack is already available, the VOLTRA can complement a classic cable management system or replace it in many applications without the need to add a weight stack.
It is particularly interesting in small training rooms where Area is more valuable than a permanently occupied machine space.
Performance
You want to specifically change resistance instead of just adjusting the weight
Eccentric overload, progressive resistance curves, speed-dependent load, and isokinetic movements expand the training beyond a classic weight stack.
This makes the system particularly suitable for athletic training, Strength development and targeted performance diagnostics.
Physiotherapy
You need controllable loads and measurable movements
Electronically controlled resistors, defined Motion speeds and force measurements allow for finer control than with many conventional cable trains.
The compact design also allows for various pulling positions without requiring multiple fixed-installation machines in the room.
Coaching & Travel
You don't always train in the same place
With the Travel Platform, Strap Mount and transport case, the system is much easier to move between training locations than a conventional cable pull.
This is especially important for coaches, athletes, and mobile workers. Training concepts interesting.
Frequently asked questions about Beyond Power and VOLTRA I
How much resistance does the Beyond Power VOLTRA I generate?
The VOLTRA I generates between 2 and 90 kg of resistance.
The load can be adjusted in increments of 0.5 kg. The resistance is generated electronically by an electric motor and not by a weight stack.
What training modes does the VOLTRA I have?
Weight training, resistance bands, a damper are available. Isokinetic, Isometric Test, Custom Curve, Rowing and Ski.
In addition, features such as Eccentric Overload, Chains, Inverse chains and assists are used.
Does the VOLTRA I need a power rack?
No. However, he needs a safe and sufficiently stable platform. Fixing point.
In addition to rack mounts, there are, among other things, wall, pole, Belt and ground solutions.
Which rack mount is the most flexible?
The Sliding Rack Mount is particularly practical for a compatible power rack when the pull height frequently changes.
It can be moved between different heights on the upright stand without having to reassemble the entire mount every time.
Before purchase, rack dimensions, hole diameter, and side Drilling tests are being carried out.
What is the difference between Sliding and Adaptive Rack Mount?
The Sliding Rack Mount stays attached to the rack upright and is moved along the upright for different exercises.
The Adaptive Rack Mount is attached using the rack holes and can be mounted without tools, and does not require any tools to be removed when replacing the battery. However, the Zug position has to be implemented.
Can a VOLTRA I replace a functional trainer?
For many one-sided cable pulling exercises, a VOLTRA can take on the function of a single cable pulling stack.
A classic functional trainer, however, has two independent motors. Cable ropes. Therefore, two VOLTRA units are required for corresponding exercises on both sides.
Does Beyond Power require a paid subscription?
No. There is no monthly subscription required for basic use of the VOLTRA I.
The Beyond+ app adds additional features to the system and is available for iOS and Android.
Does the VOLTRA I have to be connected to the power supply during training?
No. The VOLTRA I has an integrated rechargeable battery and can be used wirelessly.
Charging is done via USB-C. A 65-watt charger is included in the delivery.
Can the VOLTRA I be updated?
Yes. The VOLTRA can receive firmware updates over Wi-Fi.
Beyond Power can thus further develop functions and training modes via software without having to replace the hardware.
Is the Beyond Power VOLTRA I waterproof?
No. Beyond Power explicitly states that the VOLTRA I is not waterproof and is not shockproof either.
Therefore, the device should be properly protected during mobile use and transportation.
Can the resistance during an exercise be different?
Yes. That is one of the biggest differences compared to a normal weight loss program.
The VOLTRA can, for example, generate constant resistance, vary the load over the movement path, exert a greater amount of force eccentrically, or make the resistance dependent on the movement speed.